Guide To Proper Camera Placement For Enhanced Function & Visibility

There is no iron-clad rule for using one-size-fits-all security camera options. Every residential property comes with separate security priorities. And the only way to determine which security surveillance camera is tailored to meet your residential security needs properly is by consulting with respected camera installation specialists serving your area.

The good news, however, is that quality security service providers offer an impressive variety of residential surveillance cameras for optimal outdoor and indoor security. Not only that; they even provide immaculate installation services- be it indoor or outdoor for optimum surveillance and protection.

Your responsibility as the homeowner is to figure out two crucial things.

-The common areas to fit in your surveillance camera (be it indoor or outdoor). They include- the front door, back and side doors, driveway and garage, yard, common interior spaces such as the hallway and main stairway.

- And guidelines for proper camera placement to achieve optimal function and visibility.

Today; this post will discuss about the latter namely- “Proper camera placements for quality security surveillance.”

Here Are Those Guidelines:-

Indoor Placement:-

• Look to hang your indoor camera in the room corner as it presents the largest vantage point.

• Notable security camera system installation specialists serving Sydney state if the camera points out of the window, it may degrade its image quality. There are some security cameras which consists of IR light technology with motion detection allowing the camera to function even in low lights. 

• Infrared lights help reflect off from the windows and other glass objects, obscuring the footage in the dark. If the footage look is washed or whitened out, there is probably a reflection issue going on.

• Install your security surveillance camera angle towards indirect light to prevent direct light from washing the footage. In case of a security camera, be wary of lamps, light fixtures or bright windows. Also, prevent your camera from facing directly towards any of these light sources.

Outdoor Placement:-

• As per experts of surveillance cameras installation in Sydney-  ensure your outdoor security surveillance camera is fitted 8-10 feet from the ground. This is enough to capture the finer details but elevated enough to be out of reach of vandals and thieves.
• Install a camera which is properly rated for your climate and weather conditions. Look to place it in a semi-protected area.
• Keep in mind the movement of the sun and install your camera for indirect light. This will prevent high contrast and glares in the surveillance footage.

Keep these security positioning tips in mind when looking to install quality residential security camera systems in Sydney for your property. And for all your security surveillance systems, rely on top-rated security service providers for their quality end-to-end-solutions.

Getting Fuzzy CCTV Camera Feed? Potential Reasons You Must Know

Are you struggling with outdated CCTV camera at home? Getting fuzzy security camera feed on your screen? Well, there may be a host of culprits responsible for blurred images or videos. Off late, CCTV cameras have become a dire need in every home due to the growing rate of criminal activities, theft and unauthorised entries in private premises. The astounding benefits of CCTV cameras are worth mentioning in terms of monitoring activities both inside and outside your home. 

What if you get fuzzy images or video recordings? The whole idea of installing them becomes pointless. If you have splurged on installing CCTV cameras, it’s imperative you neither want to compromise on the safety of your property nor family members. Therefore, it’s important to dig deep into the cause of the issue and get it fixed without further delay.

Take a sneak peek with this blog and identify the potential reasons behind fuzzy security camera feed along with some tried-and-tested solutions.

• Dirt Accumulation on the Camera Lens

Dirt accumulation on the lens of camera is one of the major causes for fuzzy videos or pictures. Sometimes it becomes difficult to clean the CCTV cameras installed at greater heights or outside your home. As a result of this hindrance, spiders, germs or dirt tend to accumulate on the lens, thereby, creating an obstacle for camera to give clear images or videos.

• Too Long Extension Cables

Is the extension cord of your CCTV camera too long? Most of the time, long extension cables make it difficult for the signal to pass , thereby resulting in unclear video footages. To terminate this problem once and for all, you need to check the camera manual or specifications to ensure the cable is running within the desired range. In case, you have opted for wireless CCTV security camera installation in Sydney, you need to ensure the camera is within the desired range of your router so that it can fetch signal properly.

• Broken or Damaged Lens

Have you not upgraded your CCTV cameras for a long time? With any electrical device, it’s important to perform a regular upkeep so as to keep them running in good condition. Moreover, accidents can happen anytime without prior notice. If the lens of your camera is broken or damaged in any case, chances are high to get fuzzy pictures. To avoid these problems, it’s important to install the best home CCTV system in Sydney with high-tech specifications so that you can have peace of mind even while being outside.

Are you struggling with any of the issues mentioned above? If so, get in touch with reliable CCTV specialists who can inspect the real cause and provide fixable solutions to end your woes for good.

3 Ways to Prepare Your Home for a Successful CCTV Security Camera Installation

With an increase in theft and other criminal activities, it has become essential to install CCTV cameras installed at home.  Miscreants attack, theft, fire break out and other unwanted mishaps are not under anyone’s control. Therefore, well maintained and monitored CCTV security systems walk a long way to strengthen the security of your life and property. In most cases, it will keep away thieves and burglars from entering your premises and give you peace of mind even when you are not at home.

Before you invest in CCTV cameras, it’s essential to prepare your home for a successful installation.

Read ahead.

Identify the Areas Where You Need Surveillance

The main reason behind  CCTV security camera installation in Sydney is surveillance. Before the certified technicians arrive at your place for installing the cameras, it is important to identify the potential areas for installing CCTV cameras outside home. It may include your backyard and lawns, garden and main entrance through which miscreants can creep in. It’s better not to delegate this job upon the technicians as no one else will know the potential risks in your property better than you. The certified technicians might recommend a few more areas subject to the requirement.

Opt for a Consultation Before Installing CCTV Cameras

If you have decided to install CCTV security systems at home, you need to comply with a few wiring requirements at first. If you want to install CCTV cameras on all floors including basements, it may require additional wiring beyond the regular permissible limit or written formalities. Therefore, it would be better to seek advice from a consultant beforehand to avoid any alterations later. For instance, your technician may require a separate power point unit to connect all the cameras to the TV, in case there is lack of sufficient power points at your home.

Ensure Smooth Roof Access for Better Wiring

For CCTV security camera system installation in Sydney, you should make it easy for the technician to access the roof in order to wire the area for placing the cameras. In case of single-storied homes, the roof can be accessed easily through the garage ceiling and there is no chance of slipping off or injuries during the installation of the cameras. If you are residing in a multi-storied building, it's better to ask the technicians to install the cameras in the first half of the day in the presence of sufficient light. CCTV camera installation might take a couple of hours, so make sure you make sufficient arrangements to accommodate them.

Hope you found the post helpful. If you are planning to install CCTV cameras at home this year, follow the easiest ways to prepare your home before you take the plunge.